Epson WF-4730 Drivers, Software Download, Scanner, Manual

Epson WF-4730 Driver, Software Download, Scanner, Manual, Wireless Setup, Printer Installation For Windows 10, 8, 7, and Mac – Incorporating four machines into one, you can use the Epson WF-4730 Wireless Inkjet Printer with Fax for print, copying, scanning, as well as faxing. You’ll conserve area in your office with just one maker to run rather than 4. Creating 20 pages per min completely color, you can obtain huge documents printed out in time for the large meeting. Epson XL Padlock cartridges can print 2600 monochrome pages, and also almost 2000 in color. Compared to smaller sized cartridges, you’ll conserve cash, time, and also the setting by replacing cartridges much less usually.

Epson WF-4730 Driver
Epson WF-4730

And to make it simpler to remain on top of refills, you can pack 500 sheets of paper right into the dual paper trays. So you will not require to worry about continuously covering the paper back up. Stop lines at the printer. By connecting the Epson WF-4730 to your WiFi, everybody on the network can print from their work desk. With WiFi Direct, everybody can join even if you have not got a wireless network established. There’s Ethernet and also NFC links as well, so nonetheless your office is established, the Epson WorkForce can fit in. Epson WF-4730 Drivers, Software Download, Scanner, Manual

OS Compatible systems :

Windows 10 32-bit, Windows 10 64-bit, Windows 8.1 32-bit, Windows 8.1 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit, macOS 10.14.x, macOS 10.13.x, macOS 10.12.x, Mac OS X 10.11.x, Mac OS X 10.10.x, Mac OS X 10.9.x, Mac OS X 10.8.x, Mac OS X 10.7.x, Mac OS X 10.6.x

InstallationDriver WindowsDriver Mac

How To Installation Epson WF-4730 :

  1. Download file. For file storage locations, check computer settings.
  2. Double-click the file that was downloaded and installed on File.exe or Disk Image.
  3. Double-click Installer File.exe or Disk Image.
  4. Double-click the “Settings” file to open the settings screen. By following the instructions on the screen, install the software, and make connection settings for your printers.

Epson WF-4730 Printer  Driver, Software for Windows 10, 8, 7

OS Operating System Download
Windows Drivers and Utilities Combo Package ( Recommended ) Download
Windows Scanner Driver and Epson Scan 2 Utility v6.2.5.0 Download
Windows Epson Event Manager v3.11.08 Download
Windows Epson Software Updater v4.4.10 Download

Epson WF-4730 Printer Driver, Software For Mac:

OS Operating System Download
Mac Drivers and Utilities Combo Package ( Recommended ) Download
Mac Scanner Driver and Epson Scan 2 Utility v6.2.8 Download
Mac Epson Event Manager v2.51.62 Download
Mac Epson Software Updater v2.4.1 Download

Epson WF-4730 Wifi Setup

You can activate Wi-Fi Direct mode to allow direct communication between your product and a computer or other device without a wireless router or access point.

  1. Press the home button, if necessary.
  2. Press.
  3. Select Wi-Fi Settings.
  4. Scroll down and select Wi-Fi Direct Settings.
  5. Select Connection Settings.
  6. Select Change Password, then select YesNote: If you have already connected devices or computers to your product via Wi-Fi Direct, they will be disconnected when you change the password.
  7. Enter a Wi-Fi Direct password using the displayed keyboard. Note: Your password must be at least 8 and no more than 22 characters long.
  8. Press when you have finished entering the password.
  9. Scroll down to see the SSID (Wi-Fi network name) and password.
  10. Use your computer or wireless device to select the name of the Wi-Fi network (SSID) displayed on the LCD screen, then enter the password displayed.
  11. Press the home button to return to the Home screen. You see the AP, D, or Connection symbol directly on the LCD screen and must be able to print directly to your product from your computer or device.

         Note: If the AP, D, or direct connection symbol is not displayed on the LCD screen, Wi-Fi Direct mode is not activated. Repeat this step to try again.

Epson WF-4730 Connect Printer Setup for Windows

Follow the steps below to enable Epson Connect for your Epson printer on Windows.

Note: Make sure your product is set up with a wireless or Ethernet connection as described in the Start Here sheet for your product.

To view the Start Here sheet, open the Epson support main page, select your product, select Manual, then click Start Here.

  1. Download and install the Printer Connect Connect Setup Utility from Epson.
  2. Agree with the End User License Agreement, then click Next.
  3. Click Install, then Finish.
  4. Select your product, then click Next.
  5. Select Printer Registration, then click Next.
  6. Select Agree, then click Next.
  7. When you see a message Register the printer to Epson Connect, click OK.
  8. Do one of the following:
  9. If you create a new account, fill in the form Create an Epson Connect account, then click Finish.
  10. If you register a new product with an existing account, select I already have an account, fill in the form Add a new printer, then click Add.
  11. Click Close.

Leave a Comment